Brendan Power & Alternative Harmonicas Forum

You can make the magnetic force stronger quite easily. Romove the upper coverplate and lower reedplate/coverplate combination. Use a small screw-driver or similar and push the comb magnets down to the draw side. The closer they are to being flush to the comb the stronger the force will be. I still r...

Solo in G:

De Gf# Ga Bc De Gf# Ga Bc De Gf# Ga Bc De

Actually you can avoid using a tap if you want to. Make sure you have a drill bit of a genuine 1.4mm size. If so, the supplied steel screws will self-tap into the reedplate. I should have put this in the video but, since drill bits are often under their nominated size, thought it best to advise usin...

You can cut them from the ink tubes of ballpoint pens. They come in different sizes, so find one that suits the 260 comb indent.

There is a fitting video on this page that could prove useful for getting a good seal:

http://www.brendan-power.com/OverblowBo ... lowBooster

Thanks for the comments - to answer: Sachlaw: Yes. my custom comb will fit these new Lucky 13 variants, and has special LookDots that are appropriate for the repeating scale to help you find your way around. Jazmaan: Not planning a Lucky 13 in C# at this stage, so if you want one the easiest idea is...

Hi Triona, AFAIK Easttop are sticking with welded reeds for the bulk of their models - the popular T008K diatonic is an exception. My new PowerBender/PowerDraw use T008K reedplates combined with the open-back covers from their Blues Player model, but with a single central cover screw. Riveted attach...

They've been a long time coming, but are finally here! This weekend at the APHF in Beijing and then SPAH in St. Louis I'm launching two new Lucky 13 models in tunings designed for melody and improvisation. The extended length of the Lucky 13 lends itself well to harmonica tunings that repeat every f...

I'm pleased to announce the release of my new-generation PowerBender and PowerDraw 10 hole harp models in five keys: Low F, G, A, C, D. Made to my specifications by the respected Easttop harmonica company, they have phosphor-bronze reeds, close reed/slot tolerances, riveted reeds, traditional sandwi...

Since these harps have never been made before, interesting new effects/abilities from the sliding reedplates keep coming to light. Roverharp (who made the first prototype Special 20 version) thought of one: If you move the draw plate only half-way in either direction, the draw reeds are stopped by t...