How to get Extra, Deeper Bends on Harmonica

A space for players interested in my specialist harmonicas, alternate tunings, instructional material, recordings etc to ask questions and share information, experiences, videos etc.
User avatar
IaNerd
Posts: 588
Joined: Thu Aug 10, 2017 6:42 pm
Location: Iowa, USA

Re: How to get Extra, Deeper Bends on Harmonica

Post by IaNerd » Thu Feb 03, 2022 4:08 pm

Brendan, you recently posted a YouTube video in which you explain and demonstrate various alternate positions for the Hohner PentaHarp. Here again we can see even more possibilities if we were to play those positions with HFS technology. Pretty cool!

User avatar
Brendan
Posts: 819
Joined: Fri Mar 24, 2017 2:28 pm
Contact:

Re: How to get Extra, Deeper Bends on Harmonica

Post by Brendan » Thu Feb 03, 2022 6:02 pm

Ah, thanks for the reminder

User avatar
Brendan
Posts: 819
Joined: Fri Mar 24, 2017 2:28 pm
Contact:

Re: How to get Extra, Deeper Bends on Harmonica

Post by Brendan » Fri Apr 22, 2022 9:23 am

UPDATE, for those interested in this topic:

Whilst the two methods described in this thread (TurboSlide or Half-Flat Slide) give you extra deeper draw bends (or standard draw bends plus blow bends in the variation), I still want more!

Specifically, to get standard draw bends, deeper draw bends, and blow bends - all with interactive-reed bending. The only way to do it is by adding extra reeds. A harmonica like this would be a new category, a hybrid of standard and x-reed types in one instrument, which could be switched between at will.

Although it probably wouldn't appeal to most, it's pretty much my personal dream harmonica! So over the past few weeks I've been obsessively trying a bunch of different designs to achieve it. You'd be surprised at how many ways there are to do it - but none is simple... 🥴

With the TurboSlide you need 30 reeds, without it you need 40 reeds. So far I've made nine widely differing working prototypes of this prospective new harmonica type, all with some outlandish combination of custom parts: combs, baseplates, sliders, valves, over-valves, modular reeds, magnet holders - you name it! I'm having fun, and still have some more ideas to try. When I arrive at the best version I'll let you know.

Now, back to the workshop... 🙂

EdvinW
Posts: 259
Joined: Tue Jun 05, 2018 6:02 pm
Location: Sweden

Re: How to get Extra, Deeper Bends on Harmonica

Post by EdvinW » Fri Apr 22, 2022 9:59 pm

Thanks for the update! I'm much looking forward to see what you come up with :)
Edvin Wedin

User avatar
Brendan
Posts: 819
Joined: Fri Mar 24, 2017 2:28 pm
Contact:

Re: How to get Extra, Deeper Bends on Harmonica

Post by Brendan » Wed Apr 27, 2022 9:24 am

This is one version: a 40 reed double-diatonic, with slider. It's working well in lower keys but not in the top couple of holes in higher keys, because of Helmholtz Resonance Coupling issues due to the long chambers. I'm working on a way to shorten them, but there's a limit with this design that may make it unsuitable for keys above C.
IMG_20220425_213407.jpg
IMG_20220425_213407.jpg (616.32 KiB) Viewed 7827 times
Attachments
IMG_20220425_213212.jpg
IMG_20220425_213212.jpg (506.89 KiB) Viewed 7827 times

Post Reply