Brendan,
Will your Slider Bass kit work on a Huang Bass that is the same size or similar to the Hohner 265?
Thanks
Gary
Slider Bass
Re: Slider Bass
'Same size' = yes.
'Similar' = probably not, unless the dimensions are within 0.5mm overall in length and width.
If you can send photos and exact measurements I can give you an assessment.
'Similar' = probably not, unless the dimensions are within 0.5mm overall in length and width.
If you can send photos and exact measurements I can give you an assessment.
-
- Posts: 2
- Joined: Fri May 05, 2017 9:24 pm
Re: Slider Bass
Thanks Brendan,
I had also queried George Miklas and George said no. The reason being that the holes on the Huang are above and below each other.
The Hohner holes are staggered (off set) between the decks
Gary
I had also queried George Miklas and George said no. The reason being that the holes on the Huang are above and below each other.
The Hohner holes are staggered (off set) between the decks
Gary